ONN Wireless Mouse Manual 100012594 ONN Wireless Mouse Instructions PC Setting For Windows Mac Connecting DPI Adjust Battery Insert

Onn wireless bluetooth mouse manual

ONN Wireless Mouse Manual

onn. Wireless Bluetooth Mouse
Mode:100012594 User Guide

● Wireless Bluetooth Mouse
●Nano Receiver
●1 x AA Battery
●User’s Manual

● Do not mix old and new batteries.
● Do not mix alkaline,standard (carbon-zinc),
or rechargeable (ni-cad,ni-mh,etc)batteries

Establishing a Bluetooth Connection
The Bluetooth mouse can work in 4.0 Bluetooth environment.Before connecting your Bluetooth mouse
with your computer,make sure your computer has a working Bluetooth configuration with Human
Interface Device(HID)profile.If your computer does not support Bluetooth 4.0,you need to obtain
and insta a commercially available Bluetooth dongle which converts your computer to a Bluetooth


ONN Wireless Mouse how to connect
If your wireless mouse has not been connected to your computer or Android tablet after completing
the previous steps,the following information will help you to complete the connection..
1.Make sure the computer or Android tablet is on.
2.Switch the mouse to 2.4GHz or Bluetooth mode.
3.2.4GHz mode:Plug Nano Receiver and press the CONNECT BUTTON on the underside of the mouse
Bluetooth mode:press the CONNECT BUTTON on the underside of the mouse.
4.DPI Switch Keywill flash 10 seconds to indicate the mouse is pairing on the computer or Android tablet.

System Requirements
USB Port:Windows 7,Windows 8 or up,Mac OS X 10.8 or up.
Bluetooth Smart:Windows 8 or up,Mac OS X 10.10 or up.
*Support Android device 4.4v or up,Window device with Bluetooth 4.0(LE)or up.
*Note mouse connectivity thru Bluetooth varies on supported Android device version.
1.Left button
2.Right button
3.Scrolling Wheel
6.DPI Switch Key

7.Nano Receiver

8.Battery Cover

9.Connect Button

10.Switch mode:OFF/2.4GHz/Bluetooth

Press this button to view the next page in your Internet browser.
Press this button to view the previous page in your Internet browser.
DPI Switch Key(Five different DPl)
a)5 adjustable DPI
The blink on key indicates the DPI setting in use
DPI Blink
600 dpi 1
1000dpi 2
1600 dpi 3
2400 dpi 4
3600 dpi 5
b)Default is 1600 DPI

Step 1:Take off the battery cover off.
Step 2:Insert the batteries as shown inside the battery storage.
Step 3:Replace the battery cover.
Step 4:Switch ON to 2.4GHz mode
Step 5:Insert the NANO RECEIVER into your computer.
Step 6:Your mouse will connect automatically,letting you use your mouse wirelessly.

How do I sync my Onn wireless mouse?

Windows 8 or up
1.Switch the mouse to Bluetooth mode.
2.Press the”window”button to get into Computer.
3.Click the Bluetooth icon on the task bar and then dick”Add a Bluetooth Device”.
4.Get into PC Setting.
Select your device

5.Press the CONNECT BUTTON on the underside of the mouse.
6.To dick”Add a device”then select”BLE Wirelless Mouse”.

1.Switch the mouse to Bluetooth mode.
2.Click the Bluetooth icon on your desktop or in the system bar,then select”Turn Bluetooth On”.
3.Select”Set up Bluetooth device”.
4.The”Bluetooth Setup Assistant tab”would appear.Please follow the instructions and dick”continue”.
5.Select”Mouse”then dick”continue”.your mouse needs to be in”discovery”mode to be detected,
therefore while the computer is searching for the mouse press the”connect”button on the bottom
of the mouse.

6.Press the CONNECT BUTTON on the underside of the mouse.
7.Select the specific mouse then press”continue”.
8.The computer is pairing with the mouse.Press”continue”.
9.Your Bluetooth mouse is setup click”Quit”to exit the tab.

Android Tablet
1.Switch the mouse to Bluetooth mode
2.Click the setting icon on your Android tablet.
3.Turn on Bluetooth setting on your tablet.
4.Press and hold the connect button on mouse for approximately 3 second.
5.Press the CONNECT BUTTON on the underside of the mouse.

6.Select”BLE Wireless Mouse”from available device list.
7.Selected setting will show paired or connected when pairing success.
Disconnecting Bluetooth mouse from your computer
If you would like to disconnect your Bluetooth mouse,just open the Bluetooth devices control panel and
delete the pairing for the mouse.

Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates,uses and can radiate radio
frequency energy and,if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off
and on,the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.Operation is subject to the
following two conditions:(1)This device may not cause harmful interference,
and (2)this device must accept any interference received,including interference
that may cause undesired operation.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual.The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
FCC Caution:Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Walmart Inc.,
Bentonville,AR 72716

Need help?
We’re here for you every day from 7 a.m.-9 p.m.CST.
Give us a call at 1-888-516-2630
We’d love to hear from you. Scan with your Walmart app and let us know what you think.

onn wireless mouse not connecting

onn wireless mouse troubleshooting